G900HXXU1ANG3 Galaxy S5 SM-G900H 4.4.2 Update Southeast Asia Release

Are you rocking the Samsung Galaxy S5 (SM-G900H Exynos) type?  And you lived in Indonesia, Vietnam and Cambodia, then you are about to see a new software update to build version number G900HXXU1ANG3. The new software update dubbed as 4.4.2 G900HXXU1ANG3 will replaced the previous build 4.4.2 G900HXXU1ANE2, as usual every updates brings an improved system stability,  bug-fixes and security enhancements.

Technical details of G900HXXU1ANG3

Android version:	4.4.2
Baseband version:	G900HXXU1ANG3
Kernel version:	3.0.4-2109283
Build number:	KOT49H.G900HXXU1ANG3
PDA:	G900HXXU1ANG3
CSC:	G900HOLB1ANG1
PHONE:	G900HXXU1ANG3

Confirmed countries available so far:

• Cambodia
• Indonesia
• Vietnam
• and Kazakhstan

So just manually check the update  via over-the-air or using Samsung Kies for software upgrading. Below are just a simple guide from where you can update your Galaxy S5 to the latest software update. The update may only takes several minutes to download as it has around 200 MB in size.

How to Upgrade the Galaxy S5 SM-G900H to the latest 4.4.2 Software Update

Samsung always advises us to prepare the following important notes to consider before performing the software update.  I have also added some useful insights why you should follow this procedures to keep your  phone in safe.

Recharge the phone’s battery – You should make sure your device is fully recharged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.

Back important data – You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happened and it forces you to perform a factory data reset which basically wipes your phone’s memory.

Galaxy S5 has no root - Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Galaxy S5 SM-G900H may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ or “Your device has been modified Software update are not available” you should try to avoid that from happening.

Update to  G900HXXU1ANG3 4.4.2 via Over-The-Air (OTA)

 This is usually how the carrier branded or locked Samsung Galaxy S5, performs a software update.  This method is Firmware Update through over the air or called as OTA update, which usually a notification message will directly sent to you from your network provider or Samsung and notifies you that there is a new update available for download.  If you did not received any notification messages you can manually check fro the update instead.  Doing this you may only tap on your Galaxy S5 SM-G900F Settings>>About Device, tap Software Update.

• Find “Software update”
• Slide your finger down the display starting from the top edge of your mobile phone.
• Tap the settings icon.
• Tap About device.
• Tap Software update.

It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

Update to G900HXXU1ANG3 Through Kies

The second method is a firmware update through Samsung Kies. You may head-over to your  local Samsung support page from where you can download Samsung Kies from there, and install it in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 SM-G900H and other Samsung devices running with Android 4.4.2 and up OS .  Once you installed Kies 3, all you need is connect your Samsung Galaxy S5 SM-G900H to the computer using the USB cable, then simply run and follow Kies on-screen software update instructions.

If you already received this update, just do shed us some info on how the G900HXXU1ANG3 4.4.2 software update performs on your Samsung Galaxy S5 SM-G900H.

Read More »

G900FDXU1ANG1 Galaxy S5 SM-G900F 4.4.2 KitKat Update Release in Singapore

New Android 4.4.2 KitKat hitting Singaporeans Samsung Galaxy S5 LTE SM-G900F. The new software update dubbed with firmware build G900FDXU1ANG1 and provides a much higher changelist as we compare to the previous 4.4.2 G900FXXU1ANE2 update.  The G900FDXU1ANG1 is now made available in Samsung Kies firmware server for both Singapore's unbranded and branded Samsung Galaxy S5 G900F phones.  As usual, there are no official changelog  has yet announced about the new 4.4.2 G900FDXU1ANG1  update,  so make sure to find it and observe how the update performs.

In addition some folks already received the G900FDXU1ANG1 says that it adds an improved system stability, security enhancements and bug-fixes, while the features stays the same and no other major changes. Advanced users also acknowledge  that they are struggling to root the new 4.4.2 G900FDXU1ANG1 using towelroot, this scenario is not new since once in a while a new update arrived it includes user's security enhancements.

(see details here)

G900FDXU1ANG1 Firmware Info:

Here are the build info of  the 4.4.2 update build version G900FDXU1ANG1 Galaxy S5 G900F:

Android version:	4.4.2 (KitKat OS)
Baseband version:	G900FDXU1ANE2
Kernel version:	3.0.4-2091818
Build number:	KOT49H.G900FDXU1ANG1
PDA:	G900FDXU1ANG1
CSC:	G900FOLC1ANG1
Phone:	G900FDXU1ANE2
Build Date:	July 1st 2014

How to Upgrade the Galaxy S5 SM-G900F 4.4.2  to the latest 4.4.2 Software Update

Samsung always advises us to prepare the following important notes to consider before performing the software update.  I have also added some useful insights why you should follow this procedures to keep your  phone in safe.

Recharge the phone's battery - You should make sure your device is fully recharged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.

Back important data - You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happened and it forces you to perform a factory data reset which basically wipes your phone's memory.

Galaxy S5 has no root - Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Galaxy S5 SM-G900F may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ or “Your device has been modified Software update are not available” you should try to avoid that from happening.

Update to 4.4.2 G900FDXU1ANG1 via Over-The-Air (OTA)

 This is usually how the carrier branded or locked Samsung Galaxy S5, performs a software update.  This method is Firmware Update through over the air or called as OTA update, which usually a notification message will directly sent to you from your network provider or Samsung and notifies you that there is a new update available for download.  If you did not received any notification messages you can manually check fro the update instead.  Doing this you may only tap on your Galaxy S5 SM-G900F Settings>>About Device, tap Software Update.

• Find "Software update"
• Slide your finger down the display starting from the top edge of your mobile phone.
• Tap the settings icon.
• Tap About device.
• Tap Software update.

It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

Update to 4.4.2 G900FDXU1ANG1 Through Kies

The second method is a firmware update through Samsung Kies. You may head-over to your  local Samsung support page from where you can download Samsung Kies from there, and install it (guide for installation) in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 SM-G900F and other Samsung devices running with 4.3, 4.4.2 and up OS .  Once you installed Kies 3, all you need is connect your Samsung Galaxy S5 SM-G900F to the computer using the USB cable, then simply run and follow Kies on-screen software update instructions.

If you already received this update, just do shed us some info on how the G900FDXU1ANG1 4.4.2 software update performs on your Samsung Galaxy S5 SM-G900F.

Read More »

Canadian Samsung Galaxy S5 G900W8 New Android 4.4.2 Update G900W8VLU1ANF3

Canadian Samsung Galaxy S5 users are about to see the new Android 4.4.2 KitKat OTA update the brings the software build version G900W8VLU1ANF3. The new G900W8VLU1ANF3 is now held available to all Candian carriers, including Rogers, Bell Mobility, Telus, Wind, Virgin-Mobile and among other carriers. There are no other reports or official announcements has yet to come but the 4.4.2 G900W8VLU1ANF3 is out there and are ready to be pushed as we already spotted it on Samsung Kies firmware server. It might to roll out in phases on the next 24 hours or on the next couple of days.

As I already mentioned that there is no official release note about this update, so we aren't have no idea of what benefits could it bring on the Samsung Galaxy S5 SM-G900W8. The firmware packaged is still in Android 4.4.2 but one thing for sure this might add some few improvements to the device. So better try to perform a manual check under your Galaxy S5 Settings >> System update >> Update Now.
You can also do a manual software update check via Samsung Kies if yo have Kies 3 installed on your computer.

Here are the software build info of the
G900W8VLU1ANF3:

Device: Samsung Galaxy S5
Model number: SM-G900W8
Android version: 4.4.2
Baseband version: G900W8VLU1ANF3
Kernel version: 3.0.4-1947824
Build number: KOT49H.G900W8VLU1ANF3
AP: G900W8VLU1ANF3
CSC: G900W8VLU1ANF3
CP: G900W8OYA1ANF3

The new 4.4.2 G900W8VLU1ANF3 will replaced the previous 4.4.2 G900W8VLU1AND1. So make sure that your Samsung Galaxy S5 N900W8 device has not been rooted prior to received the OTA update, or otherwise if your device has root or has been modified you may faced software update failures and you may need to unroot your Samsung Galaxy S5 N900W8 so you can received the OTA update again.

If anyone out there might perhaps already got the new 4.4.2 G900W8VLU1ANF3 KitKat update, just do share us some info so your fellow Canadian Samsung Galaxy S5 users may know how the update performs or might have any other new features you have found on it.  I'll just update this post if can gather additional info about this update.

Read More »

G900HXXU1ANE2 Galaxy S5 SM-G900H 4.4.2 Firmware Updates on May, June & July 2014

The Samsung Galaxy S5 SM-G900H (Exynos type) has yet received another Android 4.4.2 KitKat update dubbed as firmware build number G900HXXU1ANE2 . The new 44.2 G900HXXU1ANE2 has seen rolled out all over in Russia, Middle East, Africa, Latin America and Asian countries, this has been gradually released by Samsung and giving its way to replaced the previous Android 4.4.2 G900HXXU1ANCI, and the 4.4.2 G900HXXU1ANCD.  The 4.4.2 G900HXXU1ANE2 update will add some improvements and security enhancements on the international Samsung Galaxy S5 SM-G900H,  the features may still the same but brings a better UI usability and performance.

Technical details of G900HXXU1ANE2?

This is what we got in Russia, Ukraine and Uzbekistan’s Galaxy S5 SM-G900H

Europe 4.4.2 G900HXXU1ANE2

Android version:	4.4.2
Baseband version:	G900HXXU1ANE2
Kernel version:	3.0.4-1539356
Build number:	KOT49H.G900HXXU1ANE2
AP:	G900HXXU1ANE2
CP:	G900HXXU1ANE2
CSC:	G900HOXE1ANE2

Middle East & Africa 4.4.2 G900HOJV1AND4

Android version:	4.4.2
Baseband version:	G900HXXU1ANE2
Kernel version:	3.0.4-1539356
Build number:	KOT49H.G900HXXU1ANE2
CP:	G900HXXU1ANE2
CSC:	G900HOJV1AND4

Latin America 4.4.2 G900HUUB1ANE2

Android version:	4.4.2
Baseband version:	G900HXXU1ANE2
Kernel version:	3.0.4-1539356
Build number:	KOT49H.G900HXXU1ANE2
CP:	G900HXXU1ANE2
CSC:	G900HUUB1ANE2

Asia 4.4.2 G900HODD1AND2

This is the firmware build details found on Galaxy S5 SM-G900H in Asia.

Android version:	4.4.2
Baseband version:	G900HXXU1ANE2
Kernel version:	3.0.4-1539356
Build number:	KOT49H.G900HXXU1ANE2
CP:	G900HXXU1ANE2
CSC:	G900HODD1AND2

These are the list of Galaxy S5 SM-G900H Android 4.4.2 firmware build G900HXXU1ANE2  4.4.2 Firmware updates on every countries.
Note: It ay not completely covered but might only give you some idea to where it is available for now.

How to Update the Galaxy S5 SM-G900H to the latest 4.4.2 G900HXXU1ANE2 Software Release

Update to G900HXXU1ANE2 4.4.2 via Over-The-Air (OTA Update)

There are two types you can update your Samsung Galaxy S5 the first method is firmware update through over the air or called as OTA update, which usually a notification message will directly sent to you and saying that there is a new update available for download. You can also tap on your Galaxy S5 SM-G900I  Settings>>General tab, scroll to and tap System Update. It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

Update to G900HXXU1ANE2 4.4.2 via Kies

The second method is a firmware update through Samsung Kies. You may head-over to your local Samsung support page from where you can download Samsung Kies from there, and install it (guide for installation) in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 SM-G900I and other Samsung devices running with 4.3 ,4.4.2 and up OS . Once you installed Kies 3, all you need is connect your Galaxy S5 to the computer using the USB cable, then simply run and follow the Kies on-screen software update instructions.

Important Things you should do first before Performing a Software Update

According to Samsung you should prepare the following things before performing the software update. I will also add some useful insights why you should follow this procedures.

You should make sure your battery is fully charged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.
You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happens and it forces you to perform a factory.

Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Samsung Galaxy S5 SM-G900H may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ you should try to avoid that from happening.

If anyone happens to be from Australia  and have had managed to received this update, just do share to everyone how’s your first impression on the G900HXXU1ANE2 4.4.2 update on your Galaxy S5 G900H. You may check everything, from new features it might have, network to data connectivity, speed, smoothness and don’t forget about the battery life performance.

Read More »

AT&T Galaxy S5 Active G870A Stock 4.4.2 G870AUCU1ANE4 Firmware

Here is the first Android 4.4.2 KitKat Stock Firmware for AT&T's Samsung Galaxy S5 Active  (SM-G870). The stock firmware will be useful just in-case when the time comes that you might want to return back your Samsung Galaxy S5 Active  SM-G870 to it's official firmware. The stock firmware can wipe root or any customization that you may wish to be completely remove from your phone.

Once your phone has been modified, it also proven essential to use the stock firmware if you cannot receive any OTA update anymore  Some advanced user have had used the stock firmware if they have messed-up from customization and resulted into bricks, so the stock firmware is also best for fixing unwanted soft-bricks, bootloops or just stuck on a welcome screen logo.

So like I said, use of the stock firmware is for AT&T's Galaxy S5 Active G870A advanced users only.  This cannot be used and is not recommended  by any of those who did not know how the stock firmware works.

G870AATT1ANE4 Firmware Info:

Here are the build info of  the 4.4.2 Kitkat firmware version G870AATT1ANE4 Galaxy S5 G870A:

Phone name:	Galaxy S5 Active
Model:	SM-G870A
Android version:	4.4.2 (KitKat OS)
Baseband version:	G870AUCU1ANE4
Kernel version:	3.0.4-1542323
Build number:	KOT49H.G870AUCU1ANE4
AP/PDA:	G870AUCU1ANE4
CSC:	G870AATT1ANE4
Phone:	G870AUCU1ANE4
Build Date:	9th of May 2014
Stock:	DOWNLOAD (1.53 GB)

Important Note before Installing Galaxy S5 SM-G870A 4.4.2 G870AUCU1ANE4 Firmware

- The stock firmware will also get outdated once there is a new updates arrives and you may not be able to use this firmware build version. so make sure to check everything

- Make sure that your Galaxy S5 Active is fully recharge or at-least have 60% remaining battery power.
- Stock ROM packages comes in two formats the ‘Full-Wipe’ (delete your stored data after flashing) and the ‘Non-Wipe’ (it doesn’t delete your phone’s stored data) but it is highly recommended to make a back up all important files stored from your phone’s internal memory – contacts, messages, etc.  before flashing no-matter if it is Full-WIpe or Non-Wipe,  just to be safe and ensure that your stored data are in  safe  if something went wrong during the flashing process.
- Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port.  Odin will not work on MAC OS.
- Use the supplied USB cable for your Galaxy S5.
- Enable USB debugging from your phone’s settings. Go to Settings > About device > Look for the build number, and tick that  build number for 7-times until a pop-up message says‘Congratulations you are now a developer’ .
- Do a “Hard Reset” if you have a lot of 3rd party applications installed from your phone, this is useful to gain a smooth flashing. Just make sure that you already back up all your important files before resetting your device as this step will wipe your data.
- Ensure that KIES is closed and not running in the system tray! Kies will interrupt and doesn’t like Odin, it will block you from flashing.

Download the necessary tools to install the G870AUCU1ANE4 Firmware

Odin Flasher Tools that will work on Galaxy S5 Active G870A
Odin3_v3.07 download
Odin3_v3.09 download
Galaxy S5 USB Driver - install  Kies 3 or  download

Extract the downloaded G870AUCU1ANE4 stock firmware

You need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.

Run and Configure Odin

Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked, only  the ‘AUTO-REBOOT and ‘F.RESET TIME’ checkboxes are both remained checked.

Reboot your Galaxy S5  Active into Download Mode

To reboot the Galaxy S5 into  download mode , you need to turn the power off.  After it completely shut off,  just  press and hold the Volume Down key,  Home button and the PowerON/OFF button simultaneously.

You should then prompted into a warning screen and asking you  to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Connect your Phone to PC or Laptop

Once you already reboot the phone in download mode,  simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin.

Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the G870AUCU1ANE4 tar.md5 file

If the stock ROM is pack in One .tar.md5 file only the PDA, CSC and Phone modem are already included to it. Now, you need to just simply click on the PDA button, then browse to the folder where the .tar or .tar.md5 you have previously extracted and then select and load it. ” G870AUCU1ANE4_G870AATT1ANE4_Home.tar.md5″.

Start Installing G870AUCU1ANE4 stock

Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM.
Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finish.

Wait until a word PASS!! appears

When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s to remove it from PC or laptop USB connection.

Possible errors that you may encountered, this is based on my own experience while flashing stock ROM on Samsung Android devices. These are just a few hints on how to resolved it.

Q: I got an error message that says “Set-up connection Failed” ?
A:  Do the following steps:

1. Check your USB connection from the phone to PC,
2. Connect to another PC USB port
3. Check and try to another USB cable
4. Re-install the USB driver.

Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, It isn’t responding at all?
A: Check for possible program that might interrupt the process, like disabling the anti-virus and closing any running programs.
Try to use another PC or laptop,

Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?
A: You can fix it via recovery mode option, do this:
Boot in recovery mode
1. Press and hold Volume Up, Home and Power button.
2. Use volume keys to select, Up and Down and Power or Home key to select the option
3. Select Wipe Data/Factory Reset using the Home button.
4. Next select the Wipe Cache Partition
5. Lastly, select Reboot System Now to reboot your Galaxy S5 in Normal mode.



That’s it! you have now learned how to install Samsung Galaxy S5 stock ROM. You can use this procedure again and again, using any future stock ROM that only match with your device.
All other questions and suggestions are most welcome, just let me know by leaving a message on the comment form below. Enjoy!

Read More »

T-Mobile Galaxy S5 OTA update to G900TUVU1BNF6 add VoLTE support

T-Mobile  now brings the VoLTE support for Galaxy S5 G900T, as the U.S. carrier has officially rolled out  the new 4.4.2 KitKat update that jump up to build version G900TUVU1BNF6. The G900TUVU1BNF6 brings some new features, system improvements and  the VoLTE support that allows users to connect to the voice over LTE  coverage scattered all throughout the country.  The  VoLTE connections is now available in a total of fifteen markets,  according to T-Mobile's release note.

The update has been rolled out via OTA update and while other users can see the update yet can also download via Samsung Kies.

Here is TMO's announcement:

Beginning June 19 after 5 p.m. PST the Samsung Galaxy S 5 will have a software update to Android 4.4.2/Baseband G900TUVU1BNF6 that turn on VoLTE services via OTA over Wi-Fi in available VoLTE markets only. For devices not in VoLTE markets, the update will be available via Kies starting June 20. VoLTE capabilities are limited to markets that have had VoLTE turned on.This update provides features and improvements:

• New Features
• Turns on VoLTE
• Improvements

VoLTE Markets
Atlanta
Austin
Chicago
Dallas
Houston
Long Island
Los Angeles
Minneapolis
New England
New Jersey
New York
Philadelphia
San Francisco
Seattle
Washington D.C.

Here are the Technical details of the G900TUVU1BNF6

Model number: SM-G900T
Android version: 4.4.2
Baseband version: G900TUVU1BNF6
Kernel version: 3.4.0-1966588
dpi@SWDD5915 #1
Tue Jun 17 19:31:15 KST 2014
Build number: KOT49H.G900TUVU1BNF6
SE for Android: Enforcing
AP: G900TUVU1BNF6
CP: G900TUVU1BNF6
CSC: G900TTMBU1BNF6

Tips on How to Upgrade the Galaxy S5 SM-G900T to G900TUVU1BNF6 4.4.2 Software Update

Samsung as well T-Mobile support team always advises us to prepare the following important notes to consider before performing the software update.  I have also added some useful insights why you should follow this procedures to keep your  phone in safe.

Recharge the phone’s battery – You should make sure your device is fully recharged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.

Backup important data – Even though it is not as always necessarily but if something might went wrong while taking the software update your  your important data is already in a safe place.  You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happened and it forces you to perform a factory data reset which basically wipes your phone’s memory.

Galaxy S5 has no root - Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Galaxy S5 SM-G900T may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ or “Your device has been modified Software update are not available” you should try to avoid that from happening.

How to Update to G900TUVU1BNF6 4.4.2 via Over-The-Air (OTA)

 This is usually how the carrier branded or locked Samsung Galaxy S5, performs a software update.  This method is Firmware Update through over the air or called as OTA update, which usually a notification message will directly sent to you from your network provider or Samsung and notifies you that there is a new update available for download.  If you did not received any notification messages you can manually check fro the update instead.  Doing this you may only tap on your Galaxy S5 SM-G900T Settings>>About Device, tap Software Update.

• Find “Software update”
• Slide your finger down the display starting from the top edge of your mobile phone.
• Tap the settings icon.
• Tap About device.
• Tap Software update.

It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

How to Update to G900TUVU1BNF6 4.4.2 Through Kies

The second method is a firmware update through Samsung Kies. You may head-over to your  local Samsung support page from where you can download Samsung Kies from there, and install it in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 SM-G900T and other Samsung devices running with Android 4.4.2 and up OS .  Once you installed Kies 3, all you need is connect your Samsung Galaxy S5 SM-G900T  to the computer using the USB cable, then simply run and follow Kies on-screen software update instructions.

Source

Read More »

Sprint Galaxy S5 4.4.2 OTA update G900PVPU1ANE5 enable WI-FI calling support

Sprint has rolled out another software on Sprint Sprint Galaxy S5 (G900P), the update is still packed in 4.4.2 KitKat and it will bumps the software build version to  G900PVPU1ANE5. The update brings the Wi-Fi calling support and there are no any other new features mentioned according to the released keynotes. The changelog is absolutely short, as the Wi-Fi calling is the only item you may see on the list.

The Wi-Fi calling hasn't been enabled on previous 4.4.2 update build G900PVPU1AND2, due to this some users had been requesting this feature and have waited patiently and so finally Sprint have put itinto action.  So there it goes you may check this update as it's a nice feature, and surely everyone will be happy to seeing that it actually arrive.

According to some folks who already received the new 4.4.2 G900PVPU1ANE5 says that also fixes some issues they have faced before such as the LTE.  Some difficulties on getting a reliable LTE signal at home has now being resolved as some people Galaxy S5 didn't have all the spark bands enabled by default but some did and this update ensures all but Band 3  are enabled also.

The changelog G900PVPU1ANE5 4.4.2 KitKat Update:

- Enable WI-FI calling support

Technical details of G900PVPU1ANE5 4.4.2 KitKat Update:

Device: Samsung Galaxy S5
Model number: SM-G900P
Carrier: Sprint
Mode number: SM-G900P
Android Version: 4.4.2
Baseband version: G900PVPU1ANE5
Kernel version: 3.4.0-1750661
dpi@SWDD6020 #1
Fri May 30 21:23:48 KST 2014
Build number: KOT49H.G900PVPU1ANE5
SE for Android status
Enforcing
SEPF_SM-G900P_4.4.2_0016
Fri May 30 21:23:28 2014
Security software version
MDF v1.0 Release 3
VPN v1.4 Release 1
PDA: G900PVPU1ANE5
CSC: G900PSPT1ANE5
PHONE: G900PVPU1ANE5

The software update usually  going out in stages, so if  haven’t received the notification message right away you can manually check it from your Galaxy S5 phone, just simply tap on Settings » About phone » Software updates.

source

Read More »

Galaxy S5 Android 4.4.3 Update Will Arrive This Month

As we have seen the Android 4.4.3 update that has took in action after Google has officially started to pushed it on the Google Nexus and the Play Edition Devices. While other Android smartphones makers like Motorola has also rolled out the 4.4.3 update on its Moto G line-ups, including the Moto E, Moto G, and Moto X. Now it looks like that Samsung won't left behind and will also about to bring the Android 4.4.3 update on the Galaxy S5 and Galaxy S4.


According to a report that the 4.4.3 update will be hitting this month on the International Galaxy S5 - the SM-G900H and the SM-G900F models. While the Galaxy S4 will also get the Android 4.4.3 treatment next month. But this report only came from an alleged leaked documents from Samsung and there is no exact date to when it could arrive. So just take a deep breath and relax for a while, until the said 4.4.3 update for your Galaxy S5 will finally out there for grab.

Android 4.4.3 Update on T-Mobile Moto X

Source

Read More »

Australian Samsung Galaxy S5 SM-G900I G900IDVU1ANE1 4.4.2 Update Brings NFC bug fix

New 4.4.2 KitKat update is hitting on Australia's Samsung Galaxy S5 SM-G900I phones. The firmware build number now dubbed as G900IDVU1ANE1 an update to the previous 4.4.2 G900IDVU1AND2 on April. The update brings an option to change the Docking icons, NFC bug fix  and among other general stability and performance improvements. The update has already started rolling-out over-the-air OTA update for Vodafone Galaxy S5 users, but we also spotted the firmware builds for Optus, Telstra and the unbranded Australia's  Galaxy S5 SM-G900I are also now on Samsung Kies firmware server.  The  G900IDVU1ANE1  is roughly 101MB in size  when you update via OTA, while updating via Samsung Kies it's roughly 2.4GB.

Here are the firmware build Technical details on each of the Australians Samsung Galaxy S5 SM-G900I G900IDVU1ANE1 4.4.2 updates.

Unlocked or unbranded Galaxy S5  G900IDVU1ANE1 4.4.2

Model: SM-G900I
Android version: 4.4.2
Kernel version: 3.4.0-1626427 dpi@SWDD5901 #1 Tue May 13 17:21:54 KST 2014
Baseband version: G900IDVU1ANE1
Build number: KOT49H.G900IDVU1ANE1
AP: G900IDVU1ANE1
CSC: G9001XSA1ANE1
CP: G900IDVU1ANE1

Vodafone  Galaxy S5  G900IDVU1ANE1 4.4.2

Model: SM-G900I
Android version: 4.4.2
Kernel version: 3.4.0-1626427 dpi@SWDD5901 #1 Tue May 13 17:21:54 KST 2014
Baseband version: G900IDVU1ANE1
Build number: KOT49H.G900IDVU1ANE1
AP: G900IDVU1ANE1
CSC: G9001VAU1ANE1
CP: G900IDVU1ANE1

Optus  Galaxy S5  G900IDVU1ANE1 4.4.2

Model: SM-G900I
Android version: 4.4.2
Kernel version: 3.4.0-1626427 dpi@SWDD5901 #1 Tue May 13 17:21:54  KST 2014
Baseband version: G900IDVU1ANE1
Build number: KOT49H.G900IDVU1ANE1
AP: G900IDVU1ANE1
CSC: G9001OPS1ANE1
CP: G900IDVU1ANE1

Telstra Galaxy S5 G900IDVU1ANE1 4.4.2

Model: SM-G900I
Android version: 4.4.2
Kernel version: 3.4.0-1626427 dpi@SWDD5901 #1 Tue May 13 08:19:44 KST 2014
Baseband version: G900IDVU1ANE1
Build number: KOT49H.G900IDVU1ANE1
AP: G900IDVU1ANE1
CSC: G9001TEL1ANE1
CP: G900IDVU1ANE1

Below are just simple guide on how you can download and installs the new 4.4.2 G900IDVU1ANE1 update.

How to Update the Samsung Galaxy S5 SM-G900I to the latest 4.4.2 Android Software

Samsung always advises us to prepare the following important note to consider before performing the software update. I have also added some useful insights why you should follow this procedures to keep your phone in safe mode while updating.

Recharge the phone’s battery – You should make sure your device is fully recharged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.

Backup important data – You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happened and it forces you to perform a factory data reset which basically wipes your phone’s memory.

Galaxy S5 has no root - Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Galaxy S5 SM-G900I may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ or “Your device has been modified Software update are not available” you should try to avoid that from happening.

Update to G900IDVU1ANE1 4.4.2 via Over-The-Air (OTA)

Samsung Galaxy S5 OTA Update This is usually how the carrier branded or locked Samsung Galaxy S5, performs a software update. This method is Firmware Update through over the air or called as OTA update, which usually a notification message will directly sent to you from your network provider or Samsung and notifies you that there is a new update available for download. If you did not received any notification messages you can manually check fro the update instead. Doing this you may only tap on your Galaxy S5 SM-G900I Settings>>About Device, tap Software Update.

• Find “Software update”
• Slide your finger down the display starting from the top edge of your mobile phone.
• Tap the settings icon.
• Tap About device.
• Tap Software update.

It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

Update to G900IDVU1ANE1 Through Kies

The second method is a firmware update through Samsung Kies. You may head-over to your local Samsung support page from where you can download Samsung Kies from there, and install it in your Windows or Mac computer.

Choose the new Kies 3 which supports the Galaxy S5 SM-G900I and other Samsung devices running with Android 4.4.2 and up OS . Once you installed Kies 3, all you need is connect your Samsung Galaxy S5 SM-G900I to the computer using the USB cable, then simply run and follow Kies on-screen software update instructions.

Just let us know if you have  managed to  get the G900IDVU1ANE1 4.4.2 software update.  How it perform on your Samsung Galaxy S5 SM-G900I?

source

Read More »

T-Mobile Galaxy S5 OTA update G900TUVU1ANE6 fixes SMS/MMS & network connectivity issues

T-mobile has just released another 4.4.2 software update for the Galaxy S5 and this time it's dubbed with firmware build number G900TUVU1ANE6, this is for those an  who previously received the 4.4.2 G900TUVU1ANE5 a week ago and suffered some issues such as  failures on incoming SMS/MMS, network signal lose and Wi-Fi Calling problem.  So this is an important update to fix the Galaxy S5 SM-G900T.

The  G900TUVU1ANE6 is around 18MB in size and it's live via over-the-air (OTA) or update the phone manually using Samsung Kies.

Here are the Technical details of the G900TUVU1ANE6

Model number: SM-G900T
Android version: 4.4.2
Baseband version: G900TUVU1ANE6
Kernel version: 3.4.0-1616466
dpi@SWDD5707 #1
Fri May 23 20:25:18 KST 2014
Build number: KOT49H.G900TUVU1ANE6
SE for Android: Enforcing
AP: G900TUVU1ANE6
CP: G900TUVU1ANE6
CSC: G900TTMBU1ANE6

Tips on How to Upgrade the Galaxy S5 SM-G900T to G900TUVU1ANE6 4.4.2 Software Update

Samsung as well T-Mobile support team always advises us to prepare the following important notes to consider before performing the software update.  I have also added some useful insights why you should follow this procedures to keep your  phone in safe.

Recharge the phone’s battery – You should make sure your device is fully recharged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.

Backup important data – Even though it is not as always necessarily but if something might went wrong while taking the software update your  your important data is already in a safe place.  You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happened and it forces you to perform a factory data reset which basically wipes your phone’s memory.

Galaxy S5 has no root - Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Galaxy S5 SM-G900T may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ or “Your device has been modified Software update are not available” you should try to avoid that from happening.

How to Update to G900TUVU1ANE6 4.4.2 via Over-The-Air (OTA)

 This is usually how the carrier branded or locked Samsung Galaxy S5, performs a software update.  This method is Firmware Update through over the air or called as OTA update, which usually a notification message will directly sent to you from your network provider or Samsung and notifies you that there is a new update available for download.  If you did not received any notification messages you can manually check fro the update instead.  Doing this you may only tap on your Galaxy S5 SM-G900T Settings>>About Device, tap Software Update.

• Find “Software update”
• Slide your finger down the display starting from the top edge of your mobile phone.
• Tap the settings icon.
• Tap About device.
• Tap Software update.

It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

How to Update to G900TUVU1ANE6 4.4.2 Through Kies

The second method is a firmware update through Samsung Kies. You may head-over to your  local Samsung support page from where you can download Samsung Kies from there, and install it in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 SM-G900T and other Samsung devices running with Android 4.4.2 and up OS .  Once you installed Kies 3, all you need is connect your Samsung Galaxy S5 SM-G900T  to the computer using the USB cable, then simply run and follow Kies on-screen software update instructions.

Source

Read More »

G900FXXU1ANE2 Galaxy S5 SM-G900F 4.4.2 Firmware Update

Here are the  G900IDVU1AND2 firmware for  Galaxy S5 SM-G900F to those who are running with rooted, any ROMs and custom recovery and cannot get the update officially from Kies or over-the-air OTA.    The G900FXXU1ANE2 is an incremental update that may improved system stability and other enhancements. Again, the stock firmware below, are for those who might to return back to official 4.4.2 KitKat update G900FXXU1ANE2. Once you install back an official G900FXXU1ANE2 you will lose root, but you can still root back and install custom recovery anytime you want.

How to Install Back the Official G900FXXU1ANE2 4.4.2 Firmware on Galaxy S5 SM-G900F

Sooner or later if you alter your Galaxy S5 you will end-up and  come through this. Once you root or install in custom ROM and then you want to return back your Galaxy S5 to its original firmware, then this is what you need.

Disclaimer: We shall not be held responsible if anything happens to your device by following this guide. You may proceed at your own risk, your phone is not a toy for us, it is your own personal property, it is up to you to decide on what and how to do about it.

Important Note before Installing Galaxy S5 SM-G900F 4.4.2 G900FXXU1ANE2 Firmware

- Make sure that your Galaxy S5′s battery is fully charge.
- Stock ROM packages comes in two formats the ‘Full-Wipe’ (delete your stored data afterflashing) and the ‘Non-Wipe’ (it doesn’t delete your phone’s stored data) but it is highly recommended to make a back up all important files stored from your phone’s internal memory – contacts, messages, etc.  before flashing no-matter if it is Full-WIpe or Non-Wipe,  just to be safe and ensure that your stored data are in  safe  if something went wrong during the flashing process.
- Remember or back up the APN settings of your device. ( This only done if you try to install other regions stock ROM.
- Use a PC or laptop that runs in Windows OS, with a good and perfectly working USB serial port.  Odin will not work on MAC OS.
- Use the supplied USB cable for your Galaxy S5.
- Enable USB debugging from your phone’s settings. Go to Settings > About device > Look for the build number, and tick that  build number for 7-times until a pop-up message says ‘Congratulations you are now a developer’ .
- Do a “Hard Reset” if you have a lot of 3rd party applications installed from your phone, this is useful to gain a smooth flashing. (Just make sure that you already back up all your important files before resetting your device.
- Ensure that KIES is closed and not running in the system tray! Kies will interrupt and doesn’t like Odin, it will block you from flashing.

Download the necessary tools to install the G900FXXU1ANE2 Firmware

Odin Flasher Tools

Odin3_v3.07 download
Odin3_v3.09 download
Galaxy S5 USB Driver  download

G900FXXU1ANE2 Firmware Info:

Here are the build info of  the 4.4.2 update build version G900FXXU1ANE2 Galaxy S5 G900F:

Android version:	4.4.2 (KitKat OS)
Baseband version:	G900FXXU1ANE2
Kernel version:	3.0.4-1315312
Build number:	KOT49H.G900FXXU1ANE2
AP/PDA:	G900FXXU1ANE2
CSC:	G900FOXA1ANE2
Phone:	G900FXXU1ANE2
Build Date:	April 11th 2014

Download G900FXXU1ANE2 4.4.2 Firmware

Note!

Choose and install only the right stock ROM on each specified Galaxy S5 model number, DO NOT install to other model numbers for it will harm your device or resulting to possible bricks.
Stock ROM are case sensitive and may result to undesired outcomes if used improperly.. Eachstock ROM was built to a specific product code variant. South America version SM-G900I  stock ROM cannot be used on other regions like U.S. Canada, Europe, Asia, Middle East, Africa for it might result into unwanted bricks or other problems such as data connectivity and signal lost.
[table id=9 /]

Unbranded NE2 4.4.2 Stock

Austria  - ATO-G900FXXU1ANE2  (link)
Germany - DBT-G900FXXU1ANE2  (link)
Switzerland - AUT-G900FXXU1ANE2  (link)
United Kingdom - BTU-G900FXXU1ANE2  (link)
Italy - ITV-G900FXXU1ANE2  (link)
Nordic Countries - NEE-G900FXXU1ANE2  (link)
Spain - PHE-G900FXXU1ANE2  (link)
Poland - XEO-G900FXXU1ANE2  (link)
South East Europe - SEE-G900FXXU1ANE2  (link)

Carrier Branded NE2 4.4.2 Stock

Austria (T-Mobile)  - MAX-G900FXXU1ANE2  (link)
Austria (Telering)  - TRG-G900FXXU1ANE2  (link)
Austria (A1) - MOB-G900FXXU1ANE2  (link)
Germany  (T-Mobile) - DTM-G900FXXU1ANE2  (link)
Germany (1&1) - XEG-G900FXXU1ANE2  (link)
Germany (Vodafone) - VD2-G900FXXU1ANE2  (link)
Germany (O2) - VIA-G900FXXU1ANE2  (link)
Switzerland (Swisscom) - SWC-G900FXXU1ANE2  (link)
More Countries & Carrier Providers - See here

Extract the downloaded G900FXXU1ANE2 stock firmware

You need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.

Run and Configure Odin

Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ is unchecked, only  the ‘AUTO-REBOOT and ‘F.RESET TIME’ checkboxes are both remained checked.

Reboot your Galaxy S5 into Download Mode

To reboot the Galaxy S5 into  download mode , you need to turn the power off.  After it completely shut off,  just  press and hold the Volume Down key,  Home button and the PowerON/OFF button simultaneously.

You should then prompted into a warning screen and asking you  to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Connect your Phone to PC or Laptop

Once you already reboot the phone in download mode,  simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin.

Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the G900FXXU1ANE2 tar.md5 file

If the stock ROM is pack in One .tar.md5 file only the PDA, CSC and Phone modem are already included to it. Now, you need to just simply click on the PDA button, then browse to the folder where the .tar or .tar.md5 you have previously extracted and then select and load it. ” G900FXXU1ANE2_G900FOXA1ANE2_Home.tar.md5″.

Start Installing G900FXXU1ANE2 stock

Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM.
Do not ever interrupt the phone while already in flashing progress, like disconnecting the cable or turning off the device. Just wait until it completely finish.

Wait until a word PASS!! appears

When the Stock ROM installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed. (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s to remove it from PC or laptop USB connection.

Confirm your fresh firmware installed by typing *#1234# or
Go to Settings>About Phone>Firmware info.
You can also do factory reset by dialing *2767*3855#.
Check and reconfigure your APN settings when data networks connection issues encountered. This only happens if you installed other regions stock ROM.

Possible errors that you may encountered, this is based on my own experience while flashing stock ROM on Samsung Android devices. These are just a few hints on how to resolved it.

Q: I got an error message that says “Set-up connection Failed” ?
A:  Do the following steps:

1. Check your USB connection from the phone to PC,
2. Connect to another PC USB port
3. Check and try to another USB cable
4. Re-install the USB driver.

Q: Odin just suddenly stuck in the middle of nowhere while in flashing progress, It isn’t responding at all?
A: Check for possible program that might interrupt the process, like disabling the anti-virus and closing any running programs.
Try to use another PC or laptop,

Q: I experienced bootloop or the phone just stuck on Welcome Logo (phone always stop at bootanimation) and it won’t boot normally?
A: You can fix it via recovery mode option, do this:
Boot in recovery mode
1. Press and hold Volume Up, Home and Power button.
2. Use volume keys to select, Up and Down and Power or Home key to select the option
3. Select Wipe Data/Factory Reset using the Home button.
4. Next select the Wipe Cache Partition
5. Lastly, select Reboot System Now to reboot your Galaxy S5 in Normal mode.

That’s it! you have now learned how to install Samsung Galaxy S5 stock ROM. You can use this procedure again and again, using any future stock ROM that only match with your device.
All other questions and suggestions are most welcome, just let me know by leaving a message on the comment form below. Enjoy!

Read More »

G900FXXU1ANE2 Galaxy S5 SM-G900F 4.4.2 KitKat Update, UK Release

G900FXXU1ANE2 a Samsung Galaxy S5 SM-G900F 4.4.2 KitKat  firmware now seen rolling out via Kies software update.  However,  the G900FXXU1ANE2 4.4.2 has only recently seen in the UK and Ireland at this time being, but might also arriving in all countries across Europe. The G900F U1ANE2 4.4.2  this is an incremental software update to the previous 4.4.2 G900FXXU1ANCE. As usual there is no changelog available for the G900F U1ANE2 4.4.2 update, but again once on every updates it brings an improved system stability, minor tweaks for bug-fixes, security enhancements and among other system improvements. G900FXXU1ANE2 is now live and can be downloaded thru Kies software update. You may use Kies 3 to get the the NE2 4.4.2 update, as Kies 3 supports the Galaxy S5 SM-G900F to perform an update.

G900FXXU1ANE2 4.4.2 KitKat Update  Firmware build details:

Here are the build info the Galaxy S5 G900F firmware build version of G900FXXU1ANCE seen in UK and Ireland.

Android version:	4.4.2
Baseband version:	G900FXXU1ANCE
Kernel version:	3.0.4-1539356
Build number:	KOT49H.G900FXXU1ANE2
AP:	G900FXXU1ANE2
CSC	G900FOXA1ANE2
PHONE:	G900FXXU1ANE2

Your Galaxy S5 SM-G900F should run the 4.4.2 KitKat firmware G900FXXU1ANCE and your device is not rooted so you can get the G900FXXU1ANE2 without any hiccups. You may check your device now if its runs on the G900FXXU1ANCE by hitting Settings>More>About Device.

Android version:	4.4.2
Baseband version:	G900FXXU1ANCE
Kernel version:	3.0.4-1182732
Build number:	KOT49H.G900FXXU1ANCE
PDA:	G900FXXU1ANCE
CSC:	G900FOXA1ANCE
Phone:	G900FXXU1ANCE

If you are at from the mentioned countries  you may now check for the G900FXXU1ANE2 4.4.2 update through over-the-air  or OTA update or by using Kies 3 while connecting your Galaxy S5 G900F into your computer.  Below are just a simple guide for those, doesn’t any ides how to perform a firmware update.

How to Update the Galaxy S5 SM-G900F to the latest Software Release G900FXXU1ANE2 4.4.2

To update your Galaxy S5 you can select the two known methods such updating thru Kies and via OTA over-the-air.  On unlocked Galaxy S5 devices mostly updates has sent out and only available via Kies while the carrier branded version can be seen on both Kies and OTA updates.

Important Note Before Performing Software Update on your Galaxy S5.

According to Samsung you should prepare the following things before performing the software update. I will also add some useful insights why you should follow this procedures.

• You should make sure your battery is fully charged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called   “soft-bricks”.  There is an error message saying "Firmware upgrade encountered an issues please recovery and try again".  If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.
• You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happens and it forces you to perform a factory.
• Your Galaxy S5 should not been modified or rooted, there is a certain circumstances that a modified and rooted Samsung Galaxy S5 may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made.  Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ you should try to avoid that from happening.

Update your Galaxy S5 SM-G900F to G900FXXU1ANE2 4.4.2 via Over-The-Air (OTA)

You can also tap on your Galaxy S5 Settings>>General tab, scroll down and tap Software Update. It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

Update your Galaxy S5 SM-G900F to 4.4.2 G900FXXU1ANE2 Using Kies 3

The second method is a firmware update through Samsung Kies. You may head-over to your  local Samsung support page from where you can download Samsung Kies from there, and install it (guide for installation) in your Windows or Mac computer. Choose the new Kies 3 which supports the Galaxy S5 and other Samsung devices running with 4.4.2 and up Android operating system.  Once you installed Kies 3, all you need is connect your Galaxy S5 to the computer using the USB cable, then simply run and follow the Kies on-screen software update instructions. If you already  received the  G900FXXU1ANE2 4.4.2 update on your Galaxy S5 G900F. You may then check everything on how this update performs. Does it increases speed, battery life performance and among other stuff.

Read More »

AT&T Galaxy S5 KitKat Update G900AUCU2AND3 brings Find My Mobile and Reactivation Lock

First software update build number G900AUCU2AND3 for AT&T Galaxy S5 SM-G900A officially rolled out by Samsung and AT&T. The update has no any major changes but brings an extra features such as Find My Mobile and Reactivation Lock which Samsung's default apps, adding the Lookout and YP Mobile as AT&T's new bloatwares. The update The update file size is 46MB and is made available via over the air or OTA update.

Here are the changelog of G900AUCU2AND3

• AT&T Apps - Adding Lookout and YP Mobile
• Samsung Apps - Adding Find My Mobile and Reactivation Lock

The Find My Mobile feature allows owners to locate the device when lose it.  While the reactivation lock is some kind of security suite found on Samsung Galaxy Note 3, that allows users to lock the device into further customization. Once the user put a reactivation locked to the device it cannot be reset by anyone else without of course the users permission.  Both needs a Samsung account to use such features.

Again, the roll out might be in stages make sure to hit your Galaxy S5 Settings>>About Device>>Check for Software Update. To check for more info make sure to hit the source below or follow are simple guide.

How to Upgrade the Galaxy S5 to the latest Software Update

Samsung always advises us to prepare the following important notes to consider before performing the software update.  I have also added some useful insights why you should follow this procedures to keep your  phone in safe.

Recharge the phone’s battery – You should make sure your device is fully recharged before performing the software update. Do not also remove the battery during the software update is in progress. A power failures may cause damaged to your device that might results as we so-called “soft-bricks”. If this happens your device may just stuck on Samsung logo or welcome screen and can’t reboot normally.

Backup important data – You should back-up your important files, including contacts, emails, messages, photos, videos, apps and other stuff. Like I said while during software update process is interrupted there is a possibility that your data stored from your device internal SD card may lose or deleted when a sudden unexpected failure happened and it forces you to perform a factory data reset which basically wipes your phone’s memory. Follow the guide here if you don't yet on how to backup data on your Galaxy S5.

Galaxy S5 has no root - Your device should not been modified or rooted, there is a certain circumstances that a modified and rooted Galaxy S5  may not accept any official software update anymore or it can accept an update but it might harm your device once the update has made. Learn about the new Samsung KNOX security suite. Most known error that says ‘firmware upgrade encountered an issue, please select recovery mode in kies and try again‘ or “Your device has been modified Software update are not available” you should try to avoid that from happening.

Update via Over-The-Air (OTA)

 This is usually how the carrier branded or locked Samsung Galaxy S5, performs a software update.  This method is Firmware Update through over the air or called as OTA update, which usually a notification message will directly sent to you from your network provider or Samsung and notifies you that there is a new update available for download.  If you did not received any notification messages you can manually check fro the update instead.  Doing this you may only tap on your AT&T Galaxy S5 SM-G900A Settings>>About Device, tap Software Update.

• Find “Software update”
• Slide your finger down the display starting from the top edge of your mobile phone.
• Tap the settings icon.
• Tap About device.
• Tap Software update.

It will automatically tells you that a new update is available or your software is up to date when there is none yet. You can simply tap install now when you want to perform an update or install later.

source: Samsung, AT&T

Read More »

How to Recover Samsung Galaxy S5 from Bootloop and Nearly Softbrick Fix

If it happens that your Samsung Galaxy S5 ended into bootloops, here is how to fix recover it and bring it back to life.  Bootloop mainly only occurs on your Samsung Galaxy S5 if somehow you have messed-up from customizing the system files. Some modified system files are not compiled correctly or if it is it might does not matched with your Samsung Galaxy S5 versions. The Samsung Galaxy S5 comes in different  model variants, each model version uses a different approach onto the system files.

When we have done far enough into customizing our Samsung Galaxy S5 such as rooting, installing custom recovery, custom ROM, other mods and even themes. So bootloops problem basically started here,  if someone had missed figuring it out that each and every custom images has a different build versions that fits on each Samsung Galaxy S5 model variants.

What is Bootloop?

The phone is experiencing constant reboot, auto restart and cannot boot normally.  It couldn't passed the Samsung logo and welcome screen and just stuck in there.  That means your phone is in trouble and you cannot use it anymore.

To easily fix a bootloop  you may only need to find out when and how the bootloop occurred. Is it during the last time you installed a custom recovery, ROM, root kernels and any other mods?  Below are the following reasons causing your Samsung Galaxy S5 turned into unwanted bootloop, just try to figure out on each and then recover your phone to the given solution.

Fix and Recover Samsung Galaxy S5 from Bootloop After Installing Root

If you just installed root image into the system file and then it turned out bootloop once you reboot your Galaxy S5, then there must be something wrong during the flashing process. It's either you have flashed the wrong root image which it doesn't matched with your Samsung Galaxy S5 model number or the root images has not recently updated yet to worked with the current Android version of your Galaxy S5.

You have flashed the wrong root file that doesn't matched with your Galaxy S5 Model number.  

If you messed-up and turned your Galaxy S5  into soft-brick then simply flashed the correct firmware file according to the phone's model number.

• SM-G900F (International)
• SM-G900H (International)
• SM-G900I (Australia and New Zealand)
• SM-G900L  (The Americas)
• SM-G900M (The Americas)
• SM-G900A (AT&T )
  
  • Read the AT&T Galaxy S5 SM-G900A Unbrick Guide
• SM-G900T (T-Mobile US)
• SM-G900P (Sprint)
• SM-G900T1 (Metro PCS)
• SM-G900R4 (US Cellular)
• SM-G900V (Verizon)
• SM-G900W8 (Canada)

Read one of our root guide here for the international Galaxy S5 variants - Root international Samsung Galaxy S5 SM-G900F. Once you flashed the wrong root file that let say it was only built for the international Galaxy S5 SM-G900F and you flashed it with your US version of Galaxy S5 then it will also caused into sudden bootloops.

Root image doesn't seem to worked with the newest Android software update version

I have not seen this occurring  on Galaxy S5 for now, but it might also caused once and every future software update to come out.  Samsung might also try to released some patches to the Android ecosystem that might prevent from customizing.  So it will also take sometime  for the root developer to find some exploit to the patches so it will worked with the latest version. Like for example, if you have successfully rooted before with the same Android version like 4.4.2 (KitKat) and then Samsung has recently rolled out another build version like Android 4.4.3 (KitKat), so there is an adjustment going around here.

Fix Bootloop from rooting: Wipe Data Factory Reset

Reboot your Samsung Galaxy S5 into recovery mode then perform  a full wipe or data reset. This will  not absolutely clear the root image you have previously installed but just clean  and reset your phones data settings.  From here your stored will be lost, since you cannot perform back-ups if your phone is already in bootloop state and you don't have any custom recovery installed to do that.

1. Set the phone into recovery mode. First turn the Power OFF, then by holding down the Volume Up+Home and Power button at the same time.
2. Once in recovery mode screen, choose "Wipe Data /Factory Reset".
3. Lastly choose "Reboot System".
4. Then it may boot normally without bootloop.

If the bootloop problem still exists, then you need to try to restore the phone's original system files. See below recover bootloop by flashing the full stock firmware.

Fix and Recover Samsung Galaxy S5 from Bootloop After Flashing a new ROM

Flashing a new ROM into your Samsung Galaxy S5 will also caused bootloop problem. This is basically happens when you flashed a new base ROM on top of the previous ROM you've used and you forgot to perform the  a full Wipe dalvik-cache clean-up. To fix this problem try this solution.

1. Reboot your Galaxy S5 phone in Custom Recovery you installed such as CWM, TWRP and or Philz Touch recovery. First turn the Power OFF, then by holding down the Volume Up+Home and Power button at the same time.
2. Perform a select “Backup & Restore”.
3. Choose “backup” first to keep your data files in safe place.
4. Head-over  to the Advanced options.
5. Choose “Wipe dalvik-cache”.
6. Then go to “Mounts & Storage”.
7. Choose “Wipe /cache”.
8. Select Reboot the phone now.

If it doesn't fix the bootloop problem, then proceed to my last solution below on how to restore the phone's original system files. (See below recover bootloop by flashing the full stock firmware).

My Galaxy S5 cannot Enter in Recovery Mode.

If you cannot set your Samsung Galaxy S5 into recovery mode, then the above bootloop solutions will not worked for you anymore.  At this state you phone is has ended into soft-brick.  Now, let's try a different approach from here and try this solution.

1. Turn Off the phone, then pres and hold the Volume Down, Home and Power button.
2. See if you can access the download mode screen and we still have hope to fix that bootloop problem.
The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!”

If you cannot access that download mode screen then, the below solution will no worked for you and I only suggest that you may need to send your phone to your nearest support centers.

Fixing bootloop by Restoring back your Samsung Galaxy S5 original firmware

Using the stock firmware is an advantage for fixing soft-bricked phone once the its system files has been compromised and resulted into bootloop and any among other issues. This is a bit complicated since you need to download a large firmware file for your Samsung Galaxy S5, but I can a assure you that this is your last resort to bring back your Samsung Galaxy S5 from nearly softbrick to usable again.

Here are what you need:

• Odin3_v3.09 - download
• Galaxy S5 USB Driver  - download
• Download and select the correct stock firmware file according to your Galaxy S5 model number.  Samsung Galaxy S5 Original Firmware
• The supplied USB data cable of your Galaxy S5
• A Windows based computer or laptop
• A fully recharge battery

Run and Configure Odin
Run Odin downloader Odin3_v3.09 in your computer.  Configure these check-boxes options on the right top of Odin, ensure that the ‘RE-PARTITION’ has no check marked. Just leave alone the the ‘AUTO-REBOOT,  ‘F.RESET TIME’ check-box remained checked.
Reboot your Galaxy S5 into Download Mode
To reboot the Galaxy S5 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.

You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!”
Connect your Galaxy S5  to your computer or Laptop
Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port number and a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. USB port numbers in Odin download mode starts from zero to  seven. If you do not see a COM port number then there’s something missing or went wrong. You may read again from the top of this post.

Simply click on the AP button, then browse to the folder where you put the stock firmware file that you have previously downloaded and then select and load it.

Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock firmware.

Just wait until it completely finishes, it may takes a while to flash a huge stock firmware file. So just wait and relax until it finishes flashing.  Avoid interrupting your computer and your Galaxy S5 while the flashing has started, such as disconnecting the USB data cable or turning off the device.

Read More »