Update Build N9208XXU1AOH2 on Galaxy Note5 SM-N9208, Rolling Out in SEA Region

Samsung has sent out the first software update on the Galaxy Note5 (SM-N9208) variant in the Southeast Asia countries.  The update which is still basically base in Android 5.1.1  but will bump up the build number to N9208XXU1AOH2 from N9208XXU1AOGE. The update is said to bring some improvements to the device performance, but there are no any further changes affects to the device features. While taking a closer a look at the firmware build itself, it seems like it has some sort of a small adjustment,  so that the device may work perfectly to each respective mobile network in the said region.

In addition, the update is held available via Over-The-Air (OTA) update and by using the Samsung Smart Switch for PC. The following are the technical details of the said update build N9208XXU1AOH2:

Technical details of the build N9208XXU1AOH2:

About device:

Device name: Galaxy Note 5 Model number: SM-N9208

Software info:

Android version: 5.1.1 Baseband version: N9208XXU1AOH2 Kernel version: 3.10.61-5412468 Build number: LMY47X.N9208XXU1AOH2

How to check the software info on Galaxy Note 5

To manually check the firmware build details of your device just simply touch on Apps > Settings >  then touch About device under the System tab. Lastly, touch  the Software Info to view the currently installed Android version, Baseband version, Kernel version, Build number, and among other system information.

How to update the Galaxy Note 5 SM-N9208 to the latest build version

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

Check the remaining  power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.

Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.

Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.

Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.

Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off  and or removing the battery. Do not disconnect the USB cable if  you’re performing an update using a computer.

Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
“The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.
• Tap the Settings (gear icon).
• Tap the System tab.
• Tap About device.
• Tap Software update.
• Tap Check for updates.
• Tap the Install button, then OK.
• Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.

If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5  using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download a copy of Samsung Smart Switch and then simply install it in your computer.
   Smart Switch for your PC
   Smart Switch for your Mac
2. Connect your Galaxy Note 5 on your computer
3. Run Smart Switch, then wait until it recognizes the connection of the device.
4. If the update is available it will automatically prompt you to update your device. All you need is to simply click the update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

That’s all! Hope you have just updated your Galaxy Note 5 to the latest firmware version.

Read More »

Update Build N920IDVU1AOH2 Release on Samsung Galaxy Note5 (SM-N920I)

Samsung has just rolled out the first software update to which will bump up the firmware build to N920IDVU1AOH2 on the Samsung Galaxy Note5 SM-N920I. The N920IDVU1AOH2 update to which is technically an Android 5.1.1 is rolling out to the Galaxy Note5 SM-N920I owners in Australia, New Zealand, Papua New Guinea and Fiji. While on the hand,  the N920IDVU1AOH2 also happens to be the initially released firmware in Singapore's Samsung Galaxy Note5 SM-N920I owners due to the fact this particular variant was held available first in the Oceania region.

So those who got the Samsung Galaxy Note5 SM-N920I at hand you might better check the update right now. Following is the technical details of the software information  which was taken right after the device received the said N920IDVU1AOH2 update.

To manually check the firmware build details on your Galaxy Note5,  just simply touch onApps > Settings > then touch About device under the SYSTEM tab touch the Software Info to view the installed Android version, Baseband version, Kernel version, Build number, and among other system information.

Technical details of N920IDVU1AOH2

Device name: Galaxy Note 5
Model number: SM-N920I
Android version: 5.1.1
Baseband version: N920IDVU1AOH2
Kernel version: 3.10.61-5471438 dpi@SWHE2317 #1
Build number: LMY47X.N920IDVU1AOH2

The update build N920IDVU1AOH2 has officially released on both unlocked and carrier-branded Galaxy Note5 in Australia, New Zealand, Papua New Guinea, Fiji, and Singapore. The update will overwrite the previous software version such from the build N920IDVU1AOGJ and build N920IDVU1AOGE to build N920IDVU1AOH2.

So if it happens that you owned a Galaxy Note5 SM-N920I variant and if you are from the mentioned countries, you better check the update right now. Below is the step by step guide on how to update your Galaxy Note5 to build N920CXXU1AOH2 either via Over-The-Air or by using a computer.

How to update Galaxy Note 5 (SM-N920I) to Android OS build N920IDVU1AOH2

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

1. Check the remaining power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.
2. Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.
3. Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.
4. Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.
5. Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off and or removing the battery. Do not disconnect the USB cable if you’re performing an update using a computer.
6. Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
   “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.
• Tap the Settings (gear icon).
• Tap the System tab.
• Tap About device.
• Tap Software update.
• Tap Check for updates.
• Tap the Install button, then OK.

Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download Smart Switch for PC and MAC computers version and then  install it on your computer.
2. Connect your Galaxy Note 5 on your computer using the USB cable.
3. Run Smart Switch, then wait until it recognizes the connection of the device. If the update is available it will automatically prompt you to update your device.
4. Click on the Update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

Read More »

Update Build N920CXXU1AOH2 on Samsung Galaxy Note5 SM-N920C

First Samsung Galaxy Note5 SM-N9120C update to build number N920CXXU1AOH2. The latter is rolling out in the Middle East and Southeast Asian countries. According to what the update details, it stated that it brings system stability improvements and further enhancement to the device performance. So this just a minor incremental update that might only bring some few adjustment to the initial firmware released build N920CXXU1AOGE. It might only bring up some few tune-ups so the device may perform a lot better on each particular regions.

Following is the technical details of the software information  which was taken right after the device received the said N920CXXU1AOH2 update.
To manually check the firmware build details on your Galaxy Note5,  just simply touch on Apps > Settings > then touch About device under the SYSTEM tab touch the Software Info to view the installed Android version, Baseband version, Kernel version, Build number, and among other system information.

Technical details of N920CXXU1AOH2

Device name: Galaxy Note 5
Model number: SM-N920C
Android version: 5.1.1
Baseband version: N920CXXU1AOH2
Kernel version: 3.10.61-5412468 dpi@SWHE2619 #1
Build number: LMY47X.N920CXXU1AOH2

The update build N920CXXU1AOH2 has officially released in Israel, Turkey, United Arab Emirates, Saudi Arabia and
Morocco. While on the other hand only Thailand and Vietnam received the said update in SEA region.  So if it happens that you owned a Galaxy Note5 SM-N920C variant and if you are from the mentioned countries, you better check the update right now. Below is the step by step guide on how to update your Galaxy Note5 to build N920CXXU1AOH2 either via Over-The-Air or by using a computer.

How to update the Galaxy Note 5 (SM-N920C) to the latest software build N920CXXU1AOH2

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

1. Check the remaining power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.


2. Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.


3. Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.


4. Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.


5. Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off and or removing the battery. Do not disconnect the USB cable if you’re performing an update using a computer.


6. Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
   “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.


• Tap the Settings (gear icon).


• Tap the System tab.


• Tap About device.


• Tap Software update.


• Tap Check for updates.


• Tap the Install button, then OK.

Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download Smart Switch for PC and MAC computers version and then  install it on your computer.


2. Connect your Galaxy Note 5 on your computer using the USB cable.


3. Run Smart Switch, then wait until it recognizes the connection of the device. If the update is available it will automatically prompt you to update your device.


4. Click on the Update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

Read More »

Australian Carrier's Galaxy Note 5 (SM-N920I) Variant, Initial Release Firmware Build N920IDVU1AOGJ

As part of covering the Australia's  Galaxy Note 5 (SM-N920I) updates on our database, so does the carrier branded ones is also among on it. Aside from the unlocked or SIM-free Galaxy Note 5 version this particular variant is also available at the majority of Australian carriers, including Vodafone,  Optus, and Telstra.

So the first step we do is to gather up some information about the Android operating system running on it during the latter's market launch.  Below is the technical details of the initially released firmware build found on Vodafone,  Optus, and Telstra Galaxy Note 5 during its availability in the Australian shores.

Technical details of the build N920IDVU1AOGJ

About device:

Device name: Galaxy Note 5 Model number: SM-N920I

Software info:

Android version: 5.1.1 Baseband version: N920IDVU1AOGJ Kernel version: 3.10.61-5413190 Build number: LMY47X.N920IDVU1AOGJ

If you have found out that your Galaxy Note 5 still runs on the exact firmware details above, it simply means that your device hadn’t got any update yet. So make sure to update your device to the latest software version as the above firmware build is the initially released one and your device OS might have been outdated.

How to manually check the software info on Galaxy Note 5 (SM-N920I)

To manually check the firmware build details of your device just simply touch on Apps > Settings > then touch About device under the System tab. Lastly, touch the Software Info to view the installed Android version, Baseband version, Kernel version, Build number, and among other system information. Following is the technical details of the software information  that was found on Bell’s Galaxy Note5.

How to update the Galaxy Note 5 (SM-N920I) to the latest build version

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

1. Check the remaining power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.
2. Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.
3. Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.
4. Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.
5. Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off and or removing the battery. Do not disconnect the USB cable if you’re performing an update using a computer.
6. Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
   “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.
• Tap the Settings (gear icon).
• Tap the System tab.
• Tap About device.
• Tap Software update.
• Tap Check for updates.
• Tap the Install button, then OK.

Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download Smart Switch for PC and MAC computers version and then  install it on your computer.
2. Connect your Galaxy Note 5 on your computer using the USB cable.
3. Run Smart Switch, then wait until it recognizes the connection of the device. If the update is available it will automatically prompt you to update your device.
4. Click on the Update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

Read More »

Update on O2 Galaxy S6 and S6 Edge to build G920FXXU2COH4 & G925FXXU2COH4, offically released in UK and Germany

O2 network has also started rolling out the new 5.1.1 update on Galaxy S6 (SM-G920F) and S6 Edge (SM-G925F). The 5.1.1 update now bump up to build G920FXXU2COH4 on Galaxy S6 while the S6 Edge also got the build G925FXXU2COH4. Though the update is still gradually rolling out in Europe but O2 United Kingdom and O2 Germany are now taking the lead to unleashed the said update.  The  "U2COH4" update is now the 3rd Android 5.1.1 Lollipop update have ever been released on O2's Galaxy  S6 and S6 Edge alone.

The benefit of the update is still unclear as the update is still fresh, so we might perhaps add something any adverse effect and changes about it.  The update might also include some changes like the redesigned App icon and featured with Live broadcast, App Edge, Gear apps, and more. But one thing is certainly clear, the update can be seen via Smart Switch and might have been also rolled out via Over The Air (OTA) update right now or might arrive in the next few days. Below are the technicals details of both aforementioned 5.1.1 updates.

Here are the technicals details of the two updates;

Galaxy S6 (O2)

Model number: SM-G920F Android version: 5.1.1 Baseband version: G920FXXU2COH2 Kernel version: 3.10.61-5599585 Build number: LMY47X.G920FXXU2COH4 AP: G920FXXU2COH4 CP: G920FXXU2COH2 CSC:  G920FTEF2COH1

Galaxy S6 Edge (O2)

Model number: SM-G925F Android version: 5.1.1 Baseband version: G925FXXU2COH2 Kernel version: 3.10.61-5599585 Build number: LMY47X.G925FXXU2COH4 AP: G925FXXU2COH4 CP: G925FXXU2COH2 CSC:  G925FTEF2COH1

Both updates can be downloaded and installed via PC using Smart Switch but might also available wirelessly via Over The Air (OTA). The released is in stages and might take several days before the update arrives on some countries.

Update using via Over The Air (OTA)

Just ensure to recharge the battery for at least 50%. Also, backup your data using Smart Switch so you may not lose your data if somehow might go wrong during the updating process and forces you to perform a factory reset.

Here’s how to do it manually: 

• From the Home screen tap on Apps.
• Select the Settings gear icon.
• Tap About device.
• Tap Software update.
• Tap Check for an update.

It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Download and Install now if you do so or else Install later if you want to get the update in later time.

Update via Computer using Smart Switch

Download Smart Switch for PC

You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac.  Once you installed Smart Switch, all you need to do is to connect your Samsung Galaxy S6  / S6 Edge on your  computer using the supplied USB  cable.

1. Open Smart Switch in your computer.
2. Connect the Galaxy S6 Edge  into the computer using the supplied USB data cable.
3. Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK”  button to begin updating your Galaxy S6 and or S6 Edge.

Once the update is made, you may now check the technicals details of the new update, from Home screen  simply touch the Settings gear icon and then tap About device.

Read More »

T-Mobile Galaxy Note 5 SM-N920T Initial Release Firmware Build N920TUVU1AOGE

If you have a T-Mobile Galaxy Note 5 (SM-N920T), here is a recap on its Android OS. This device is running on the firmware build N920TUVU1AOGE, an Android 5.1.1 Lolipop base, during  its shipment and upon market launch in the U.S. shores. Those who may have intentionally choose this particular model, and you may wonder how's the initial release firmware being built.  Does the device has a locked bootloader? Does the device friendly enough for advanced users that whom loved into tweaking and tinkering?

To answer those questions, here is a quick lookup on T-Mobile Samsung Galaxy Note 5 (SM-N920T) Android operating system.  The T-Mobile  (SM-N920T) which has an option to unlock and relock the bootloader manually by means of an OEM unlocking feature which can be found in the device developer settings. This simply means that the T-Mobile  Galaxy Note 5  OS can be rooted and modified, and not  that much unlikely to AT&T and Verizon Galaxy Note 5 from which the Android OS itself is being locked up.

In addition, the T-Mobile Galaxy Note 5 do still have KNOX that was designed to break if and when the Android OS itself will run through on any modification method.  Below is the technical details of the initially released firmware build N920TUVU1AOGE.

Technical details of the firmware build N920TUVU1AOGE:

About device:

Device name: Galaxy Note 5 Model number: SM-N920T

Software info:

Android version: 5.1.1 Baseband version: N920TUVU1AOGE Kernel version: 3.10.61-5378774 Build number: LMY47X.N920TUVU1AOGE

Note: If your T-Mobile Galaxy Note 5 still runs on the exact firmware details above, it simply means that your device hadn’t got any update yet. So make sure to update your device to the latest software version as the above firmware build is the initially released one and your device OS might have been outdated.

How to manually check the software info on Galaxy Note 5 (SM-N920T)

To manually check the firmware build details of your device just simply touch on Apps>Settings > then touch About device under the System tab. Lastly, touch the Software Info to view the installed Android version, Baseband version, Kernel version, Build number, and among other system information. Following is the technical details of the software information  that was found on T-Mobile Galaxy Note5 (SM-N920T).

How to update the Galaxy Note 5 (SM-N920T) to the latest build version

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

1. Check the remaining power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.


2. Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.


3. Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.


4. Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.


5. Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off and or removing the battery. Do not disconnect the USB cable if you’re performing an update using a computer.


6. Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
   “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.


• Tap the Settings (gear icon).


• Tap the System tab.


• Tap About device.


• Tap Software update.


• Tap Check for updates.


• Tap the Install button, then OK.

Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download Smart Switch for PC and MAC computers version and then  install it on your computer.


2. Connect your Galaxy Note 5 on your computer using the USB cable.


3. Run Smart Switch, then wait until it recognizes the connection of the device. If the update is available it will automatically prompt you to update your device.


4. Click on the Update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

Read More »

Sprint Galaxy Note 5 SM-N920P Firmware Build N920PVPU1AOGD (Initial Release)

Here is a quick look up on Sprint Samsung Galaxy Note 5 (SM-N920P) inner Android operating system.  This device has an initial release firmware build dubbed as N920PVPU1AOGD, to which the latter is base Android 5.1.1  Lollipop. Now, unlike to AT&T (SM-N920A) and Verizon Galaxy Note 5 (SM-N920V) the Sprint version is similar to T-Mobile (SM-N920T) which has an option to lock and unlock the bootloader manually by means of an OEM unlocking feature which can be found in the device developer settings.

The Sprint Galaxy Note 5  OS can be rooted and modified and not  that much unlikely to AT&T’s Galaxy Note 5 (SM-N920A) from which the Android OS itself is equipped with KNOX enterprise which prevents root and any further customization. Doing so, the device won’t boot up and it will shut down the phone completely.

In addition, the Sprint Galaxy Note 5, including T-Mobile and the international variants do have KNOX but did not include this feature that breaks the device OS into fatal consequences when it comes to root access matter.  Below is the initial firmware build N920PVPU1AOGD details.

Technical details of the firmware build N920PVPU1AOGD:

About device:

Device name: Galaxy Note 5 Model number: SM-N920P

Software info:

Android version: 5.1.1 Baseband version: N920PVPU1AOGD Kernel version: 3.10.61-5377588 Build number: LMY47X.N920PVPU1AOGD

If your Sprint Galaxy Note 5 still runs on the exact firmware details above, it simply means that your device hadn’t got any update yet. So make sure to update your device to the latest software version as the above firmware build is the initially released one and your device OS might have been outdated to which is more prone to bugs and other problems.

How to manually check the software info on Galaxy Note 5 (SM-N920P)

To manually check the firmware build details of your device just simply touch on Apps>Settings > then touch About device under the System tab. Lastly, touch the Software Info to view the installed Android version, Baseband version, Kernel version, Build number, and among other system information. Following is the technical details of the software information  that was found on Bell’s Galaxy Note5.

How to update the Galaxy Note 5 (SM-N920P) to the latest build version

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

1. Check the remaining power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.
2. Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.
3. Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.
4. Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.
5. Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off and or removing the battery. Do not disconnect the USB cable if you’re performing an update using a computer.
6. Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
   “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.
• Tap the Settings (gear icon).
• Tap the System tab.
• Tap About device.
• Tap Software update.
• Tap Check for updates.
• Tap the Install button, then OK.

Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download Smart Switch for PC and MAC computers version and then  install it on your computer.
2. Connect your Galaxy Note 5 on your computer using the USB cable.
3. Run Smart Switch, then wait until it recognizes the connection of the device. If the update is available it will automatically prompt you to update your device.
4. Click on the Update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

Read More »

Vodafone's Galaxy S6 & S6 Edge Gets 5.1.1 Update Build to G920FXXU2QOH8 & G925FXXU2QOH8

Vodafone is now sending out another Android 5.1.1 update to its Galaxy S6 (SM-G920F) & S6 Edge (SM-G925F) devices across Europe.  The update came out as build G920FXXU2QOH8 for the Galaxy S6 while on the hand the Galaxy S6 Edge also received the build G925FXXU2QOH8.

Even though at the moment we do not know the possible effects of what's new on the update. But while taking a closer look the firmware build itself, both builds have a similarity to the also recently released build G920FXXU2COH2 and G925FXXU2COH2 on unlocked Galaxy S6 and S6 Edge. Some noticeable features found in recent updates are the newly redesign icons  taken from the Galaxy Note 5 and Galaxy S6 Edge+.  The look of the Apps icon is a rounded square, and some other new features like the Apps Edge and the Live broadcast via Youtube is also added in it.

Here are the technicals details of the two updates;
Galaxy S6
Model number: SM-G920F
Android version: 5.1.1
Baseband version: G920FXXU2COH2
Kernel version: 3.10.61-5630845
Build number: LMY47X.G920FXXU2QOH8

Galaxy S6 Edge
Model number: SM-G925F
Android version: 5.1.1
Baseband version: G925FXXU2COH2
Kernel version: 3.10.61-5630845
Build number: LMY47X.G925FXXU2QOH8

Both updates are available via Over The Air (OTA) and via PC while using Smart Switch. The released is in stages and might take several days before the update arrives on some countries.

Update using via Over The Air (OTA)

Just ensure to recharge the battery for at least 50%. Also, backup your data using Smart Switch. Just in case somehow might go wrong during the updating process your files were already in a safe place.

Here’s how to do it manually: 

• From the Home screen tap on Apps.
• Select the Settings gear icon.
• Tap About device.
• Tap Software update.
• Tap Check for an update.

It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Download and Install now if you do so or else Install later if you want to get the update in later time.

Update via Computer using Smart Switch

Download Smart Switch for PC

You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac.  Once you installed Smart Switch, all you need to do is to connect your Samsung Galaxy S6  / S6 Edge on your  computer using the supplied USB  cable.

1. Run Smart Switch in your computer.

2. Connect the Galaxy S6 Edge  into the computer using the supplied USB data cable.

3. Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK”  button to begin updating your Galaxy S6 and or S6 Edge.

Read More »

Verizon Galaxy Note 5 SM-N920V Firmware Build N920VVRU1AOGI (Initial Release)

The Verizon Galaxy Note 5 (SM-N920V) has an initial release firmware build N920VVRU1AOGI, Android 5.1.1 Lollipop OS. The latter might be the same to AT&T's Galaxy Note 5 (SM-N920A) from which the Android OS itself is equipped with KNOX enterprise which prevents root and any further customization. Doing so, the device won’t boot up and it will shut down the phone completely.

While those other Galaxy Note 5 handsets, such as T-Mobile and Sprint and the unlocked variants. Although those devices do have KNOX but did not include this feature that breaks the device OS into fatal consequences when it comes to root access matter. That is how it goes, if you'd owned the Verizon Galaxy Note 5, you must be aware with that.  Below is the initial firmware build N920VVRU1AOGI details.

Technical details of the firmware build N920VVRU1AOGI:

About device:

Device name: Galaxy Note 5 Model number: SM-N920V

Software info:

Android version: 5.1.1 Baseband version: N920VVRU1AOGI Kernel version: 3.10.61 Build number: LMY47X.N920VVRU1AOGI

If your Galaxy Note 5 still runs on the exact firmware details above, it simply means that your device hadn’t got any update yet. So make sure to update your device to the latest software version as the above firmware build is the initially released one and your device OS might have been outdated to which is more prone to bugs and other problems.

How to manually check the software info on Galaxy Note 5 (SM-N920V)

To manually check the firmware build details of your device just simply touch on Apps >Settings > then touch About device under the System tab. Lastly, touch the Software Infoto view the installed Android version, Baseband version, Kernel version, Build number, and among other system information. Following is the technical details of the software information  that was found on Bell’s Galaxy Note5.

Verizon Galaxy Note 5 SM-N920V specs:

• Android 5.1 Lollipop, TouchWiz


• 5.7inch Quad-HD Super Amoled (2560×1440)


• Exynos 7420 octa-core (2.1GHz quad + 1.5GHz quad) 64bit, 14nm


• 4GB of RAM


• 32 GB storage


• 3,000 mAh battery with Fast Charging


• 16MP rear camera F1.9 lens and OIS (optical image stabilization)


• 5MP front-facing camera


• WiFi N, Bluetooth 4.0 LE, GPS and NFC


• 153.2 x 76.1 x 7.6mm


• 171g


• Wireless charging


• S Pen stylus


• 4G LTE enabled

How to update the Galaxy Note 5 (SM-N920V) to the latest build version

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

1. Check the remaining power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.


2. Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.


3. Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.


4. Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.


5. Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off and or removing the battery. Do not disconnect the USB cable if you’re performing an update using a computer.


6. Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
   “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.


• Tap the Settings (gear icon).


• Tap the System tab.


• Tap About device.


• Tap Software update.


• Tap Check for updates.


• Tap the Install button, then OK.

Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download Smart Switch for PC and MAC computers version and then  install it on your computer.


2. Connect your Galaxy Note 5 on your computer using the USB cable.


3. Run Smart Switch, then wait until it recognizes the connection of the device. If the update is available it will automatically prompt you to update your device.


4. Click on the Update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

Read More »

AT&T Galaxy Note 5 Initial Firmware Build N920AUCU1AOGG

If you might want to find out the initial Android OS running onAT&T Galaxy Note 5 (SM-N920A), then you should learn that the device is running at the Android 5.1.1 Lollipop and dubbed with firmware build N920AUCU1AOGG.  The N920AUCU1AOGG is the initially released default firmware during the latter's market launch.

According to reports, the Galaxy Note 5 from AT&T is equipped with KNOX enterprise which prevents root and any further customization. Doing so the device won’t boot up and it will shut down the phone completely. This also the same thing being applied to the Verizon Galaxy Note 5 (SM-N920V). While those other Galaxy Note 5 handsets, such as T-Mobile and Sprint and unlocked variants do not include this feature. The Root access would simply disable the Samsung Pay application.

How to manually check the software info on AT&T Galaxy Note 5 (SM-N920A)

To manually check the firmware build details of your device just simply touch on Apps >Settings > then touch About device under the System tab. Lastly, touch the Software Info to view the installed Android version, Baseband version, Kernel version, Build number, and among other system information. Following is the technical details of the software information that was found on AT&T Galaxy Note5 with a model number of SM-N920A.

Technical details of the build N920AUCU1AOGG:

About device:

Device name: Galaxy Note 5 Model number: SM-N920A

Software info:

Android version: 5.1.1 Baseband version: N920AUCU1AOGG Kernel version: 3.10.61 Build number: LMY47X.N920AUCU1AOGG

AT&T Galaxy Note 5 has been shipped in the American shores on August 21st, 2015,  here's a quick look at the official specs for the device.

	Galaxy Note 5
Processor	64-bit, octa-core Exynos 7420
RAM	4 GB (LPDDR4)
Storage	32 GB, 64 GB UFS 2.0 (non-expandable)
Display	5.7-inch Super AMOLED Quad HD
Primary Camera	16 MP, f/1.9, OIS, phase detection autofocus, 4K video, slow motion video
Secondary Camera	5 MP, f/.19
Battery	3,000 mAh, non-removable
Charging	USB 2.0, fast charging, Qi wireless charging, Powermat wireless charging, fast wireless charging
Special Features	S-Pen
Dimensions	153.2 x 76.1 x 7.6 mm, 171g
Colors	Black sapphire, white pearl, gold platinum
Operating System	Android 5.1.1 Lollipop, TouchWiz

Read More »

Galaxy Note 5 SM-N920W8 Initial Firmware Build N920W8VLU1AOGD

The Galaxy Note 5 SM-N920W8 to which technically released in Canada and some  select  countries in the North America.  For the meantime, we have just found out that the Puerto Rico's Galaxy Note 5 SM-N920W8 runs on the initial firmware build N920W8VLU1AOGD which is base in Android 5.1.1 Lollipop OS. On the other hand,  the Canadian Galaxy Note 5 initial released OS build version would be on our next post.

How to manually check the software info on Galaxy Note 5 (SM-N920W8)

To manually check the firmware build details of your device just simply touch on Apps > Settings > then touch About device under the System tab. Lastly, touch the Software Info to view the installed Android version, Baseband version, Kernel version, Build number, and among other system information. Following is the technical details of the software information  that was found on Bell's Galaxy Note5.

Technical details of the build N920W8VLU1AOGD:

About device:

Device name: Galaxy Note 5 Model number: SM-N920W8

Software info:

Android version: 5.1.1 Baseband version: N920W8VLU1AOGD Kernel version: 3.10.61-5388899 Build number: LMY47X.N920W8VLU1AOGD

If your Galaxy Note 5 still runs on the exact firmware details above, it simply means that your device hadn’t got any update yet. So make sure to update your device to the latest software version as the above firmware build is the initially released one and your device OS might have been outdated.

The Galaxy Note 5 is available at the majority of Canadian carriers, including Bell,  Rogers, Telus, Wind, SaskTel,  Videotron and MTS.

Canada's Galaxy Note 5 SM-N920W8 specs:

• Android 5.1 Lollipop, TouchWiz
• 5.7inch Quad-HD Super Amoled (2560×1440)
• Exynos 7420 octa-core (2.1GHz quad + 1.5GHz quad) 64bit, 14nm
• 4GB of RAM
• 32 GB storage
• 3,000 mAh battery with Fast Charging
• 16MP rear camera F1.9 lens and OIS (optical image stabilization)
• 5MP front-facing camera
• WiFi N, Bluetooth 4.0 LE, GPS and NFC
• 153.2 x 76.1 x 7.6mm
• 171g
• Wireless charging
• S Pen stylus
• 4G LTE enabled

How to update the Galaxy Note 5 (SM-N920W8) to the latest build version

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

1. Check the remaining power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.
2. Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.
3. Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.
4. Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.
5. Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off and or removing the battery. Do not disconnect the USB cable if you’re performing an update using a computer.
6. Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
   “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.
• Tap the Settings (gear icon).
• Tap the System tab.
• Tap About device.
• Tap Software update.
• Tap Check for updates.
• Tap the Install button, then OK.

Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download Smart Switch for PC and MAC computers version and then  install it on your computer.
2. Connect your Galaxy Note 5 on your computer using the USB cable.
3. Run Smart Switch, then wait until it recognizes the connection of the device. If the update is available it will automatically prompt you to update your device.
4. Click on the Update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

Read More »

US Cellular Galaxy Note 5 SM-N920R4 Got the Initial Release Firmware Build (N920R4TYU1AOGE)

If you have just purchased the US Cellular Galaxy Note 5 dubbed with model number SM-N920R4 and wants to find out the initial firmware this device running at, then we have found out that it runs on Android 5.1.1 Lollipop dubbed with build number N920R4TYU1AOGE.

The US Cellular Galaxy Note 5 is offered in 32GB and 64GB version during its released  on August 13, 2015. Some other advanced features of the US Cellular Galaxy Note 5 include:

• Samsung Exynos 7420 Octa core 64-bit processor with 4GB of RAM.


• A 16MP rear-facing and 5MP front-facing cameras with image stabilization and low-light sensor.


• A wireless charging capabilities and embedded wireless charging technology compatible with virtually any wireless pad available in the market today.


• A Fast Charging and Ultra Power Saving Mode.

How to manually check the software info on US Cellular Galaxy Note 5?

To manually check the firmware build details of your device just simply touch on Apps > Settings > then touch About device under the System tab. Lastly, touch the Software Info to view the currently installed Android version, Baseband version, Kernel version, Build number, and among other system information. Following is the technical details of the software information that on US Cellular Galaxy Note5.

Technical details of the build N920R4TYU1AOGE:

About device:

Device name: Galaxy Note 5 Model number: SM-N920R4

Software info:

Android version: 5.1.1 Baseband version: N920R4TYU1AOGE Kernel version: 3.10.61-5377588 Build number: LMY47X.N920R4TYU1AOGE

Now, if it happens that your Galaxy Note 5 runs on the exact firmware details above, it simply means that your device hadn't got any update yet. So make sure to update your device to the latest software version as the above firmware build is the initially released one and your device OS might have been outdated.

How to update the Galaxy Note 5 (SM-N920R4) to the latest build version

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

1. Check the remaining power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.


2. Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.


3. Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.


4. Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.


5. Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off and or removing the battery. Do not disconnect the USB cable if you’re performing an update using a computer.


6. Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
   “The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.


• Tap the Settings (gear icon).


• Tap the System tab.


• Tap About device.


• Tap Software update.


• Tap Check for updates.


• Tap the Install button, then OK.

Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.
If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5 using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download Smart Switch for PC and MAC computers version and then  install it on your computer.


2. Connect your Galaxy Note 5 on your computer using the USB cable.


3. Run Smart Switch, then wait until it recognizes the connection of the device. If the update is available it will automatically prompt you to update your device.


4. Click on the Update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

Read More »

Update build G920FXXU2POH8 & G925FXXU2POH8 5.1.1 for Galaxy S6 and S6Edge

An update to build  version G920FXXU2POH8  for Galaxy S6 (SM-G920F) and G925FXXU2POH8 for the Galaxy S6 edge (SM-G925F) is about to reach its destination to  Switzerland.  Both updates build are an unbranded version and still in Android 5.1.1 Lollipop base. While looking at the firmware build details itself, it seems that tweaks contained inside in it is something quite similar to the ones released in England and France recently that being dubbed with build G920FXXU2COH2 and build G925FXXU2COH2. The update might also have the icons being changed with a rounded corner design just like the ones found on Galaxy S6 edge+ and the Galaxy Note 5.

So anyway, if it happens that you're from Switzerland and owns the unlocked Galaxy S6 and or the Galaxy S6 edge (SM-G925F), much better check the update right now. Below are the technical details of each update.

Samsung Galaxy S6

Model number: SM-G920F
Android version: 5.1.1
Baseband version: G920FXXU2POGQ
Kernel version: 3.10.61-5447113
Build number: LMY47X.G920FXXU2POH8
AP: G920FXXU2POH8
CP: G920FXXU2POGQ
CSC: G920FAUV2POG3

Samsung Galaxy S6 Edge

Model number: SM-G925F
Android version: 5.1.1
Baseband version: G925FXXU2POGQ
Kernel version: 3.10.61-5447113
Build number: LMY47X.G925FXXU2POH8
AP: G925FXXU2POH8
CP: G925FXXU2POGQ
CSC: G925FAUV2POG3

Update using via Over The Air (OTA)

Here’s how to do it manually:

• From your Galaxy S6 Home screen tap on Apps.
• Select the Settings gear icon.
• Tap About device.
• Tap Software update.
• Tap Check for an update.

It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Download and Install now if you do so or else Install later if you want to get the update in later time.

Update via Computer using Smart Switch

Download Smart Switch for PC

You have to choose the one that is specifically built for computer, depends on what you have either a PC or Mac.  Once you installed Smart Switch, all you need is a connection between your Samsung Galaxy S6 SM-G925F into the computer using the supplied USB data cable.

1. Run Smart Switch in your computer.

2. Connect the Galaxy S6 Edge  into the computer using the supplied USB data cable.

3. Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK”  button to begin updating your Galaxy S6 Edge.

Read More »

Update build G920FXXU2POH7 Galaxy S6 (SM-G920F), Android 5.1.1 Lollipop Arriving in Switzerland and South Africa

An update on Galaxy S6 SM-G920F to build version G920FXXU2POH7 which is an Android 5.1.1 Lollipop base have just spotted via Smart Switch server.
The G920FXXU2POH7 update is branded firmware which heading its way to Switzerland (Swisscom) and South Africa (Vodafone) Galaxy S6 devices. Though the update is now held available at Samsung's public server, the update might have been rolled out via Over-The-Air (OTA). So it is much better to check the update right now if it happens that you owned a Swisscom Galaxy S6 and a Vodafone Galaxy S6 from those aforementioned countries.

What are the technical details of G920FXXU2POH7 5.1.1 Update?

Device: Samsung Galaxy S6 (International)
Model number: SM-G920F
Android version: 5.1.1
Baseband version: G920FXXU2POH2
Kernel version: 3.10.61-5447113
Build number: LMY47X.G920FXXU2POH7
AP: G920FXXU2POH7
CSC: G920FSWV2POG3
CP: G920FXXU2POH2

How to Update the Galaxy S6 via  Over-The-Air (OTA)

This is the usual method on how to check and to perform an update on Galaxy S6 to the latest software version.  This method is what we've called Firmware Update  Over-The-Air and so-called as FOTA or simply OTA update. In most often cases, a notification message will be directly sent out to you by your network provider and by Samsung itself, telling you that there is a new update that has now available for download.  This approach requires you to recharge your phone first and you must prepare a strong WiFi connection,  and so it might happen sometimes that one did not receive any software update notification messages; 1) if and when the device is out of range during the software update roll out  period, 2) Automatic update has been turned off in the device Settings.
However, We can still manually check for the update instead.
Here’s how to do it manually:

• From your Galaxy S6 Home screen tap on Apps.
• Select the Settings gear icon.
• Tap About device.
• Tap Software update.
• Tap Check for an update.

It will then notify you that a new update is available for download. But it also says that “Your device software is up to date“, and there is no software update is yet available for grab. You can simply choose Download and Install now if you do so or else Install later if you want to get the update in later time.

But if ever you might have had received this message while checking software update that says something like “The operating system on your device has been modified in an unauthorised way. Try downloading software updates using Smart Switch on your computer or visit a customer service centre.”  This is a warning message that only appears for those devices that have been rooted and installed with modified and unofficial firmware.  So to be able to get the Software OTA update again, you must Unroot your Galaxy S6 first and removed any modification that has been installed on it.

How to Update the Galaxy S6 using Smart Switch

You can use Smart Switch to update your Galaxy S6 software to the latest versions.  It can also be used if the Software Over-The-Air update fails for some reason. The Smart Switch is way similar to the before Samsung Kies that had been used on several devices.

Download Smart Switch for PC

You have to choose the one that is specifically built for computer, depends on of what you have either a PC or Mac.  Once you installed Smart Switch, all you need is to connect your Samsung Galaxy S6 SM-G925F into the computer using the supplied USB data cable.

1. Run Smart Switch in your computer.

2. Connect the Galaxy S6  into the computer using the supplied USB data cable.

3. Smart Switch will automatically prompt you if the update is available. Just click on the “update” then the “OK”  button to begin updating your Galaxy S6.

If it doesn’t tell you about an update, you may manually navigate through its settings by doing these procedures below.

4. Click on the “More” button at the right top of Smart Switch. You will then presented to the options.  Choose “Preferences”  in the drop-down. You are then presented with two tabs the Backup file and  Software Update.  The backup file allows you to allocate a certain folder where you want your  backup files to be stored. Then on the other hand the Software Update tab is where you can set it to the Latest Software Pre-Download Settings.  Just mark the checkbox where it says  Latest Software Pre-Download.

5. Select the “Backup” button, to safely kept your important data and files such as contacts, messages, call log, videos, music, photos, application and more.  The backup data files will be stored in the  documents folder of your computer. This is a very important steps as it wipes out all of it while performing the software update process. All data will permanently be deleted and it cannot be recovered, so ensure to create a backup first before it’s too late than sorry.

6. Click on the “More” button again.  Choose “Emergency software recovery and initialization” in the drop-down option.

Choose the “Software Update and Initialization” tab.
Wait for a couple of seconds as it check the current software version of your Galaxy S6 and then check for the latest software update version to initialized.  You may then simply follow the on-screen instructions that ask you to click the “OK” or a “Cancel”button.

Once the Software update initialization started you must not  interrupt the process like unplugging  the data cable connected to the computer nor turning off the device. You must wait until it says “Software update and Initialization are complete”.

Once your Galaxy S6 reboots disconnect it from the computer. Then reconnect it back again.

7. Lastly restore the backup, choose “Restore” button to restore the previously created  backup files.

Read More »

Galaxy Note 5 SM-N9208 Firmware Build N9208XXU1AOGE, Initial Release in SEA Region

The Galaxy Note 5 SM-N9208 carries the firmware  build N9208XXU1AOGE.  The latter is the initial Android 5.1.1 Lillipop during the device shipment to select countries in South East Asian countries.  If it happens that you'd owned a Galaxy Note 5 and have had to find out that firmware information possess the same build as N9208XXU1AOGE, then it simply means that your device hadn't been updated yet.

Technical details of the build N9208XXU1AOGE:

About device:

Device name: Galaxy Note 5 Model number: SM-N9208

Software info:

Android version: 5.1.1 Baseband version: N9208XXU1AOGE Kernel version: 3.10.61-5412468 Build number: LMY47X.N9208XXU1AOGE

List of countries carries the firmware build N9208XXU1AOGE during the Galaxy Note 5 shipment:

1. Malaysia


2. Myanmar


3. Phillipines

How to check the software info on Galaxy Note 5

To manually check the firmware build details of your device just simply touch on Apps > Settings >  then touch About device under the System tab. Lastly, touch  the Software Info to view the currently installed Android version, Baseband version, Kernel version, Build number, and among other system information.

How to update the Galaxy Note 5 SM-N9208 to the latest build version

Prepare the following recommendations before you update your device, to keep it safe as possible. There is a risk involved upon updating, so make sure to follow this steps before you proceed.

Check the remaining  power percentage of the battery, it should be at least 50% or higher before you take the update. If it is lower to the recommended level, the device must be charged first. Insufficient battery power may cause a fatal error if and when the update failed to initiate.

Ensure that your device is connected to a strong Wi-Fi connection. Some firmware update may take long enough to install and it will depend on how small or large the update file size is.

Check the remaining storage space of your device memory if it still enough and can still store the file size of the incoming update. You can easily determine the incoming update’s file size as it prompts you the exact details. The size may vary, some minor updates usually varies from 100MB to 200MB while major updates also usually varied from 300MB up to 500MB.

Ensure to create a backup of your stored data in the device memory. You can easily backup your Galaxy Note 5 data by using Smart Switch. This process is very important and it is highly recommended before taking an update. You should secure you data first beforehand. If ever something might go wrong during the update process, and you might encounter a failure, you will not lose your data. Some fatal errors while performing the software update usually forces you to perform the factory reset in recovery mode. Doing so, will bring the device back to its original factory default settings but it deletes your stored data as it technically wipes and cleans out the device memory cache.

Do not ever touch your phone if the updating process is already initiated. Just let the phone sit on top of your table and make sure it could not be interrupted on any part. You should not press any keys, nor turning the power off  and or removing the battery. Do not disconnect the USB cable if  you’re performing an update using a computer.

Make sure you Galaxy Note 5 has no root in it, and or running on any unofficial firmware. Keep in mind that a rooted and a modified phone will no longer receive any official firmware update from the dealer. Doing so, you will only receive the advisory message that says something like this;
“The operating system on your device has been modified in an unauthorized way. Try downloading software updates using Smart Switch on your computer or visit a customer service center.”

Update your Galaxy Note 5 via Over The Air (OTA Update)

The Over The Air (OTA) update requires you to connect your Galaxy Note 5 to a Wi-Fi network to ease your burden on high data charges.

• From the device Home screen, simply tap Apps.


• Tap the Settings (gear icon).


• Tap the System tab.


• Tap About device.


• Tap Software update.


• Tap Check for updates.


• Tap the Install button, then OK.


• Wait until the phone completely reboot before touching it. It may reboot (turn on and off) multiple times as the update might still at its finalization stage.

If the update is available, it will just prompt you the update’s technical details including on how to download and install it. If somehow the update isn’t available yet, it will also tell you that that your device software is up to date. However, even if the update is already rolled out and you’ve already knew that it is officially released in your country and or network provider, you should also consider that the released usually take in stages and may also take days before it arrives on some areas. So you may have to wait and keep on checking until you get the update.

Update your Galaxy Note 5 using your PC or Mac computer via Smart Switch

This method is always handy on some part, especially if you have missed the update and you’re left behind to the update’s scheduled dates that usually only took place and runs in weeks. You can still easily update your Galaxy Note 5  using your PC or Mac. All you need is a USB cable and then the Smart Switch firmware update tool. Smart Switch is similar to the before Kies that have been used to older devices. Also, Smart Switch has the capability to backup and restore your data in just a few clicks away.

1. Download a copy of Samsung Smart Switch and then simply install it in your computer.
   Smart Switch for your PC
   Smart Switch for your Mac


2. Connect your Galaxy Note 5 on your computer


3. Run Smart Switch, then wait until it recognizes the connection of the device.


4. If the update is available it will automatically prompt you to update your device. All you need is to simply click the update button. Some other steps like on how to backup and restore your data is included in the instructions.

Again do not touch the phone like disconnecting the USB cable if the software update has started. You may need to wait much longer while updating via Smart Switch as your firmware is being served by Samsung itself. The Smart Switch firmware file is a much larger to the ones released via Over The Air but were still the same file.

That’s all! Hope you have just updated your Galaxy Note 5 to the latest firmware version.

Read More »